These standard, field–proven designs are built to meet your exact material handling needs.
Features Drive and take-up Pulley
The SureTrac patented drive and take-up pulley system is standard with most designs shown. Assured belt tracking, concealed pulley design, and easy belt adjustments are just a few of the features offered by this unique design.
Rugged Construction
To meet your application needs, all conveyors shown are welded construction with 12, 10 or 3/16 inch gauge formed steel, 4-1/2 to 18 inch structural channel.
Configurations: 
Horizontal Incline 
L-Incline J-Incline 
Z-Incline Tandem Drive 
Vertical Powered Curves Model CW - Wash Conveyors And Systems
Wash Conveyors and Systems provide a simple and continuous method for washing, coating, spraying, or lubricating parts.
These units are designed to eliminate time-consuming hand dipping by automatically coating cores in a predetermined, even pattern. As cores are moved through a wash tunnel, they are gravity sprayed from the top and pressure sprayed from the bottom as required. Cores are then transported to a draining section where all excess core wash is collected in a main reservoir. Blow-off stations and drying tunnels are also available to meet specific drying demands.
- Belts widths from 6 to 90 inches
- Production capacities to 1200 cores per hour
Model O - Roller Chain Conveyors
These versatile conveyors offer an ideal way to automate drilling, tapping, gluing, riveting, spot welding or other assembly functions. Its double roller bearing chain conveyor design allows fast and easy mounting of jigs and fixtures used in assembly or processing operations. As a free moving chain conveyor, it serves as a single unitbar feeder to convey tubing or round bar stock such as axle shafts, to and out of operations such as inspection, treating or testing.
- Single, double or multi-strand configurations available
- Belt widths from 4 to 36 inches
Drives A Broad selection of drives are available including: - ComPac motorized drive pulley
- A-C motors with NEMA C-face speed reducers.
- Chain-driven, V belt-driven or shaft mount drive configurations.
- Adjustable-speed A-C or D-C drives
- Motor enclosures
- including: TEFC, TENV, Severe Duty, Explosion Proof, Washdown Duty And more
- Standard or high efficiency motors.
Model F - Floor-To-Floor Conveyors
These conveyors are designed to transport loads from lightweight cartons to bulky appliances up or down one or more levels at inclines up to 25 degrees. They are available with nose-over or powertail sections for smooth transfer to a gravity roller or wheel conveyor. - Fixed or adjustable sides
- Belt widths from 12 to 60 in.
- Start/Stop/Reverse controls at both conveyor ends.
Model I - Troughing Idler Conveyors
Heavy wet or dry bulk materials such as sludge, concrete, gravel, ore, coal, earth, etc. are quietly, smoothly and dependably transported with these conveyors. Rugged structural channel construction throughout maintains proper roll alignment for long, low maintenance service. - 20, 35 or 45 roller angles
- Horizontal or incline style
- Stand-alone conveyors or complete systems.
- Balanced rolls with smooth surfaces extend belt life
- Belt widths from 18 to 48 inches
- Electric motor, or gasoline engine powered.
Model D - Table Top Conveyors
Hinged tabletop conveyors provide a solid surface for smooth, continuous movement and accumulation of cans, bottles or other containers. They are ideal for use in dairies, breweries, bottling plants, pharmaceutical facilities, etc. To withstand extremely high or low temperatures, or the effects of daily wash down, these rugged conveyors are available with thermoplastic, steel or stainless steel belts. - Belt widths from 1 to 12 inches
- Fixed or adjustable sides and table sides are available.
Model L - Slat and Drag Chain Conveyors
Slat conveyors are engineered to withstand the effects of high temperatures and high impact loading of heavy parts and assemblies. They’re commonly used in foundries, assembly and stamping plants. Drag conveyors are designed to transport non-abrasive materials such as coal or grain - or as drag-out conveyors for sludge or chips.
- Belt widths from 4 to 48 inches
- Rugged structural channel and formed sheet steel construction with plate and channel reinforcements.
Model T - Self-Cleaning Trough Conveyors
Large quantities of fine bulk materials or small parts are easily conveyed without belt jamming with Power-Pack’s Self –Cleaning Trough Conveyors. A patented release system prevents material from building up under or entering the belt return. - Available for horizontal, incline, cleated incline or portable applications.
- Belt widths available from 12 to 48 inches.
Model S - Steel Hinge Belt Conveyors 
Metal stamping, hot forging, quenched parts, flash, wet or dry chips, borings, turnings, frozen rubber parts, fasteners, castings, and more are easily transported by these rugged conveyors. They are also suited for removing plastic, rubber, wood and steel parts from high-speed automatic presses or other machinery. Each one is engineered for durability, impact loading, low maintenance, and long service life. The conveyor’s belt is constructed of heavy-gauge steel with rollers, and rods. Interlocking side wings keep small parts contained within the belt pan. The belt is driven by roller chain on both sides and bears all tension to allow the belt to float freely. - Belt widths from 6 to 60 inches
- Belt styles include: standard hinged, hinged with cleats, perforated for wet or cooling applications, dimpled to prevent parts from striking each other, partitioned for separating loads and high temperature top decking
- Torque limiter or shear pin equipped.
Model W - Wire Mesh Conveyors 
These conveyors are designed to convey hot parts through spraying, dipping, washing or coating operations. They are also ideal for transporting forgings, treated material or parts. Flat wire mesh belts are especially suited for use in foundries, stamping plants and canneries. High tensile strength wire belts for these conveyors are available to withstand temperatures to 2000 degrees f. Each belt is designed for minimum distortion to prolong belt life and is easily cleaned. - Belt widths from 4 to 72 inches.
- Belt materials available include: regular carbon steel, high carbon steel, stainless steel, or special alloy steels.
- Belt types available include: equalized spiral woven, flat wire mesh and spiral woven with outboard chain.
Model N - Magnetic Bed Conveyors 
These conveyors provide a positive method for transporting ferrous parts, horizontally, on inclines or vertically. They’re also ideal for separating ferrous from non-ferrous material or parts.On the conveyor bed, ceramic magnet T-rails hold parts firmly to the belt. Curved magnetic T-rails are raised on 75 degree curves and a magnetic corner pulley is used on all 90 degree corners. - Belts widths from 6 to 36 inches.
Model B - Vertical Belt/Bucket Conveyors
Power-Pack Belt/Bucket conveyors are an ideal solution for transporting bulk material or small unbreakable parts up 90 degrees vertical inclines. They’re commonly used to feed material into hoppers, chutes or other handling or processing equipment where a minimum of floor space is available. - Belt widths from 6 to 24 inches
- Vertical lift heights from 10 to 30 feet
Model X - Corrugated Belt Conveyors
Conveying powder, bulk material, small items and even liquids horizontally or up inclines are ideal applications for Corrugated Belt Conveyors. They feature flexible sidewalls and cleats to keep material contained within the belt. A top cover can be added to keep dust or powders from being dispersed into the air. - Belt widths from 12 to 48 inches.
- 1, 1-1/2, 2, 3, 4, 5 and 6 inch high sides available.
- 1, 1-1/2, 2, 3, 4, 5 and 6 inch high cleats available.
Model V - Flanged Trough Conveyors
Model V conveyors are designed to handle fine bulk materials, powder, sand glass or small parts at a metered rate of flow and without edge spillage. They feature: a trough angle of 30’, a 4-inch flange , and a totally enclosed belt return for added cleat and belt life. A top cover is also available to keep dust and powders from being dispersed into the air. - Belts widths from 12 to 60 inches
|
